MIL-DTL-24487B (SH)
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-24456 - Adhesive for Plastic Vibration-Damping Tiles.
MIL-DTL-24441/29 - Paint, Epoxy -Polyamide, Green Primer, Formula 150, Type IV.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-407 - Visual Inspection Guide for Rubber Molded Items.
MIL-STD-2148 Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
S9510-AB-ATM-010 Rev 2 of 30 July 1992 - Nuclear Powered Submarine Atmosphere
Control Manual.
(Copies of this document are available from the Naval Sea Systems Command, Code SEA 05Z9, 1333
Isaac Hull Avenue, SE, Stop 5133, Washington Navy Yard DC 20376-5133.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate. (DoD
adopted)
ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension.
(DoD adopted)
ASTM D 471 - Standard Test Method for Rubber Property - Effect of Liquids. (DoD adopted)
ASTM D 573 - Standard Test Method for Rubber - Deterioration in an Air Oven. (DoD adopted)
ASTM D 635 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics
in a Horizontal Position. (DoD adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business