INCH-POUND
MIL-DTL-24487B(SH)
28 January 2005
SUPERSEDING
MIL-T-24487A(SHIPS)
25 May 1990
DETAIL SPECIFICATION
TILE, RUBBER VIBRATION DAMPING, TYPE V
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all departments and agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers rubber tiles intended for damping vibrations in steel structures for
shipboard use.
1.2 Classification. The rubber tiles are of the following classes, as specified (see 6.2).
Class 1 - For damping vibration in steel plates 0.5 inch (1.3 centimeters (cm)) thick or less.
Class 2 - For damping vibration in steel plates greater than 0.5 inch (1.3 cm) but less than 0.75 inch (1.9
cm) thick.
1.3 Part or Identifying Number (PIN). The PIN to be used for tiles acquired to this specification are
created as follows:
M
24487-
X
Prefix to indicate
Specification
Class number
Military specification
number
(see 1.2)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to commandstandards@navsea.navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 9320
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business