MIL-R-83283A(USAF)
5. PACKAGING
5.1 Preservation. Preservation shall be level A or C, as specified (see 6.2).
5.1.1 Level A
5.1.1.1 Finished parts.. Finished rubber parts shall be packaged in containers conforming to PPP-B-636. The unit quantity shall be as specified by the procuring specification activity (see 6.2)..
5.1.2 Level C. The silicone rubber shall be preserved and packaged to protect against deterioration and physical damage during shipment. This level may conform to the supplier's commercial practice when the practice meets the requirements of this level.
5.2 Packing. Packing shall be level A, B, C, as specified (see 6.2).
5.2.1 Level A Unless otherwise specified by the procuring activity, rubber material shall be packed in wood, cleated-plywood shipping containers conforming to PPP-B-601, overseas type. As far as practical, containers shall be uniform in shape and size and contain identical quantities. Container closure and strapping shall be in accordance with the appendix to PPP-B-601. Gross weight of containers shall not exceed 200 pounds.
5.2.2 Level B. Level B shall be the same as level A except containers shall conform to domestic type and gross weight shall not exceed 500 pounds.
5.2.3 Level C. Packages which require overpacking for acceptance by the carrier shall be packed in exterior-type shipping containers in a manner that will insure transportation at the lowest rate to the point of delivery. Containers shall conform to the Uniform Freight Classification Rules or regulations of other common carrier, as applicable to the mode of transportation. This level may conform to the supplier's commercial practice when the practice meets the requirements of this level.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business