MIL-R-83283A(USAF)
UNIFORM CLASSIFICATION COMMITTEE, AGENT Uniform Freight Classification Rules
(Application for copies should be addressed to the Uniform Classification Committee, Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.)
(Nongovernment standards and other publications are normally available from the organizations which prepare or which distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specified exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2) the silicone rubber furnished to this specification shall be a product subject to first article inspections in accordance with 4.4. The approval of the first article sample authorizes the commencement of production,
but does not relieve the supplier of responsibility for compliance with all applicable
provisions of this specification. The first article sample shall be manufactured in the same facilities to be used for the manufacture of the production items.
3.2 Materials. The material shall be a silicone base synthetic elastomer formulated and processed to meet the requirements of this specification. All materials which are not specifically described herein shall be of high quality and suitable for the intended purpose and shall be of the same composition as the material used for the first article sample. The silicone rubber shall not deteriorate finished surfaces of wood, metal, or fabric which it contacts during normal usage. Unless otherwise specified, vulcanized joints shall be of the same size as the remaining part and shall possess at least 65 percent of the tensile strength of the parent material.
3.3 Dimensions and tolerances. Dimensions and tolerances of the silicone rubber shall be as specified on the applicable drawing as supplied by the procuring activity. (see 6.2)
3.4 Physical properties. The physical properties of the silicone rubber shall conform to the requirements specified in table I.
3.5 Workmanship. The product shall be free from defects, and foreign materials and shall be uniform in quality; also it shall be smooth and free from flash unless otherwise specified on the drawing or contract.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business