A-A-55762A
7. NOTES.
7.1 Part identification number (PIN): the following part identification numbering procedure is for
government purposes and does not constitute a requirement for the contractor. The PINs to be
used for items acquired to this description are created as follows: Basic CID number + dash size
from Table I. Do not use unassigned dash size.
AA55762 001 D 5
Grade
2 = 25
Class
3 = 30
A = 1A
4 =40
B = 1B
5 = 50
C = 2A
6 = 60
D = 2B
7 = 70
E = 3A
8 = 80
F = 3B
Dash size (without class & grade) from Table I
Basic CID number
7.2 Ordering data. The contract or order should specify the following:
a.
Title, number, and date of this CID.
b.
Dash size from Table I.
c.
Marking if different (see 3.5).
d.
Packaging requirements.
7.3 Source of documents.
7.3.1 ASTM SI10 is available from the ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959 or online at https://www.astm.org .
7.3.2 FAR. The Federal Acquisition Regulation is available from the Superintendent of
Documents, U.S. Government Printing Office, Washington, DC 20402 or online at
https://www.arnet.gov/far .
7.3.3 Government documents. Federal and military documents are available online at
https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700
Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
7.4 Utilization caution. Use of this material in items that may come in contact with human skin,
food, or portable water is not recommended without prior approval of the appropriate medical
service.
7.5 Key words.
Class
Flex resistant
Grade
Low compression
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business