MIL-PRF-20092M
4.5.12.3 Procedure. The specimen shall be tested perpendicular to the cemented seams in the testing
machine. The elapsed time before testing the cemented seams shall be not less than 24 hours at 70 ± 5°F after
cementing and not less than 70 ± 1/2 hours at 158 ± 2°F after aging.
4.5.13 Odor test. The odor test shall be conducted in accordance with ASTM C 739, Section 13.
4.45.14 Steam autoclave test. Material shall be tested in accordance with ASTM D 3574, test J1.
4.5.15 Dynamic fatigue. Material shall be tested in accordance with ASTM D 3574, test I2, procedure B.
4.6 Off-gassing. The material shall be tested in accordance with the Nuclear Powered Submarine
Atmosphere Control Manual, NAVSEA Technical Manual S9510-AB-ATM-010/(U), by a Government approved
testing facility. The results shall be submitted to the Government for evaluation and approval for use (see 3.9 and
6.5).
4.7 Toxicity. To determine conformance with the requirements of 3.10, the material shall be evaluated
using the HHA process. Sufficient data to permit a HHA of the product shall be provided by the
manufacturer/distributor to the NAVENVIRHLTHCEN. To obtain current technical information requirements
specified by the NAVENVIRHLTHCEN, see 6.6.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract
or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel,
these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. The material covered by this specification is intended for use in cushioning, packaging,
and in mattresses.
6.2 Acquisition requirements. Acquisition documents should specify the following:
(a) Title, number, and date of the specification.
(b) Type, class, and condition required (see 1.2).
(c) Whether first article is required (see 3.1).
(d) Form of material required (sheets or shapes) (see 3.3.1).
(e) When finishing is required and material to be used (see 3.3.2).
(f) Dimensions required (see 3.5).
(g) If additional marking is required (see 3.7).
(h) If off-gas testing is required (see 3.9).
(i) Conformance tests if other than as specified (see 4.4.3).
(j) Test conditions if other than as specified (see 4.5).
(k) Toxicity conformance (see 4.7 and 6.6).
(l) Packaging requirements (see 5.1).
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business