A-A-55451A
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES.
7.1 Part identification number (PIN): the following part identification numbering procedure is for
government purposes and does not constitute a requirement for the contractor. The PINs to be
used for items acquired to this description are created as follows:
AA55451 001 A 7
Grade
2 = 25
Class
3 = 30
A = 1A
4 =40
B = 1B
5 = 50
C = 2A
6 = 60
D = 2B
7 = 70
E = 3A
8 = 80
F = 3B
N = NA
Dimensions per Figure 1
Basic CID number
7.2 Ordering data. The contract or order should specify the following:
a.
Title, number, and date of this CID.
b.
Class and grade required.
c.
Length.
d.
Color required if other than natural color of compound furnished.
e.
Packaging requirements.
7.3 Source of documents.
7.3.1 ASTM standards. ASTM standards are available from the ASTM International, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959 or online at https://www.astm.org .
7.3.2 FAR. The Federal Acquisition Regulation is available from the Superintendent of
Documents, U.S. Government Printing Office, Washington, DC 20402 or online at
https://www.arnet.gov/far .
7.3.3 Government documents. Federal and military documents are available online at
https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700
Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
7.4 Utilization caution. Use of this material in items that may come in contact with human skin,
food, or portable water is not recommended without prior approval of the appropriate medical
service.
7.5 Key words.
Class
Flex resistant
Grade
Low compression
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business