A-A-55451A
3. SALIENT CHARACTERISTICS.
3.1 Dimensional and physical requirements. Dimensional and physical requirements shall conform
to figure 1. Dimensional tolerance shall conform to the applicable commercial tolerance specified in
CID A-A-59588.
.094
R .094
2 places
4 places
.440
.100
.233
Figure 1. Dimensional and physical requirements.
Notes: 1. Dimensions are in inches.
3.2 Material. Material shall be silicone rubber formulated and processed to meet the physical and
mechanical properties per the specified class and grade, when tested in accordance with ASTM
test methods specified in Table I of CID A-A-59588.
3.3 Color. Unless otherwise specified, the color of the silicone rubber shall be the natural color of
the compound furnished.
3.4 Workmanship. The end product shall be clean, smooth finished, and free from dirt, flash or
rough edges.
3.5 Metric products. Products manufactured to metric dimensions will be considered on an equal
basis with those manufactured using inch-pound units, provided they fall within specified tolerances
using conversion tables contained in the latest revision of ASTM SI 10, and all other requirements
of this commercial item description are met. If a product is manufactured to metric dimensions and
those dimensions exceed the tolerances specified in the inch-pound units, a request should be
made to the contracting officer to determine if the product is acceptable.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered
materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal
Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE.
5.1 Product conformance. The products provided shall meet the salient characteristics of this
commercial item description, conform to the producer's own drawings, specifications, standards,
and quality assurance practices, and be the same product offered for sale in the commercial
market. The government reserves the right to require proof of such conformance.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business