A-A-55759A
Table I. Dash sizes and dimensions Continued.
TEMP RATING
MIN TENSILE
DASH
A
B
C
IN
STRENGTH
SIZE
THICKNESS
WIDTH
LENGTH
ºF
COLOR
NHR
P.S.I
075-C-6
0.188
36.000
36.000
-80 to 425
55.0 to 65.0
650
Natural
076-A-4
0.250
A/A
A/A
-100 to 425
35.0 to 45.0
700
Natural
077-C-5
0.250
12.000
12.000
-80 to 425
45.0 to 55.0
700
Natural
078-A-6
0.250
36.000
36.000
-100 to 425
55.0 to 65.0
650
Natural
079-C-5
0.250
36.000
36.000
-80 to 425
45.0 to 55.0
700
Natural
080-D-4
0.250
36.000
36.000
-80 to 425
35.0 to 45.0
700
Natural
081-D-6
0.250
36.000
36.000
-80 to 425
55.0 to 65.0
650
Olive drab
082-F-5
0.250
36.000
36.000
-94 to 400
45.0 to 55.0
1200
Natural
083-F-8
0.250
36.000
36.000
-94 to 400
75.0 to 85.0
800
Natural
084-C-6
0.250
36.000
36.000
-80 to 425
55.0 to 65.0
650
Natural
085-E-3
0.250
48.000
48.000
-130 to 400
20.0 to 35.0
850
Natural
086-E-5
0.281
36.000
36.000
-130 to 400
45.0 to 55.0
1200
Natural
087-C-5
0.320
12.000
12.000
-80 to 425
45.0 to 55.0
700
Natural
088-B-5
0.393
11.790
11.790
-100 to 425
45.0 to 55.0
700
Natural
089-F-5
0.438
24.000
24.000
-94 to 400
45.0 to 55.0
1200
Gray
090-F-5
0.625
24.000
24.000
-94 to 400
45.0 to 55.0
1200
Natural
091-C-4
0.625
36.000
36.000
-80 to 425
35.0 to 45.0
700
White
092-F-5
0.750
24.000
48.000
-94 to 400
45.0 to 55.0
1200
Gray
093-F-6
1.000
24.000
24.000
-94 to 425
55.0 to 65.0
1200
Natural
094-C-4
1.250
36.000
36.000
-80 to 425
35.0 to 45.0
700
Natural
095-F-3
0.080
36.000
A/A
-94 to 400
25.0 to 35.0
1000
Gray
096-B-4
0.125
36.000
36.000
-100 to 425
35.0 to 45.0
700
Natural
097-B-4
0.250
36.000
36.000
-100 to 425
35.0 to 45.0
700
Natural
098-D-5
0.050
36.000
36.000
-80 to 425
45.0 to 55.0
700
Natural
099-B-6
0.031
36.000
36.000
-100 to 425
55.0 to 65.0
650
Gray
Notes: 1.
Unless otherwise noted, dimensions are in inches.
2.
Surface condition: Smooth.
3.
Surface condition location: One side.
4.
Color location: Both sides.
5.
NHR: Nonmetallic hardness rating, Shore Durometer A.
6.
Minimum tensile strength: psi
7.
A/A: Any acceptance
3.2 Material. Material shall be silicone rubber formulated and processed to meet the physical and
mechanical properties per the specified class and grade, when tested in accordance with ASTM
test methods specified in Table I of CID A-A-59588.
3.3 Color. Unless otherwise specified, the color of the silicone rubber shall be the natural color of
the compound furnished.
3.4 Workmanship. The end product shall be clean, smooth finished, and free from dirt, flash or
rough edges.
3.5 Marking. Unless otherwise specified (see ordering data), sheet material and strips (cut from
sheet) shall be marked with the following information: Basic CID number, class, grade,
designations, and the supplier's designations. The class and grade designations separated by a
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business