A-A-55450A
TABLE I. Part Numbers and Dimensions.
Part No.
A
B
C
D
E
F
G
LENGTH
MAT'L
COLOR
TRANS
AA55450-
.094
.125
.094
.031
.031
.031
.063
1.375
A/A
BLACK
001D6
AA55450-
.500
2.500
.500
.125
.125
.250
.250
96.0
OPAQUE
NATURAL
002C6
Notes: 1.
Dimensions are in inches.
2.
Nonmetallic hardness rating 55.0 min and 65.0 max. Shore Durometer A.
3.
Minimum tensile strength: 650 psi.
4.
MAT'L TRANS Material Transparency.
5.
A/A Any Acceptable
3.2 Material. Material shall be silicone rubber formulated and processed to meet the physical and
mechanical properties per the specified class and grade, when tested in accordance with ASTM
test methods specified in Table I of CID A-A-59588.
3.3 Workmanship. The end product shall be clean, smooth finished, and free from dirt, flash or
rough edges.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered
materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal
Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE.
5.1 Product conformance. The products provided shall meet the salient characteristics of this
commercial item description, conform to the producer's own drawings, specifications, standards,
and quality assurance practices, and be the same product offered for sale in the commercial
market. The government reserves the right to require proof of such conformance.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES.
7.1 Part identification number (PIN): the following part identification numbering procedure is for
government purposes and does not constitute a requirement for the contractor. The PINs to be
used for items acquired to this description are created as follows:
AA55450 001
D
6
Grade
6 = 60
Class
C = 2A
D = 2B
Dash number 001 or 002
Basic CID number
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business