INCH-POUND
MIL-T-6841D
26 June 1992 SUPERSEDING MIL-T-6841C
24 February 1965
MILITARY SPECIFICATION
TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of tape and sheet for use in the installation of windshields, panels, and windows in cabins and cockpits of aircraft.
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. (see 6.2).
SPECIFICATION FEDERAL
L-P-390 Plastic, Molding Material, Polyethylene, Low and Medium Density
NN-P-530 Plywood, Flat Panel
QQ-A-250/4 Aluminum Alloy 2024, Plate and Sheet
TT-T-291 Thinner, Paint, Volatile Spirits (Petroleum Spirits) UU-P-268 Paper; Kraft, Untreated, Wrapping
MMM-A-260 Adhesive, Water-resistant, (For Sealing Waterproofed Paper) PPP-B-601 Boxes, Wood, Cleated-Plywood
PPP-B-621 Boxes, Wood, Nailed and Lock-Corner
PPP-B-636 Box, Fiberboard
PPP-B-1055 Barrier Material, Waterproofed Flexible
PPP-T-45 Tape, Gummed, Paper Reinforced & Plain, for Sealing & Securing
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ASD/ENES Wright-Patterson AFB OH
45433-6503, by using the self-addressed Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
AMSC N/A FSC 9320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business